• img

Sequential BOPA With Balanced Physical Properties

HOA1 is the 15μm sequential BOPA with excellent mechanical strength and isotropic physical properities


Product Details

HOA1 can be used for color printing within 9 colors (including 9 colors), bag making with sealing width ≤ 6cm, and high-grade packaging with frame requirements. It is not easy to warp and curl after boiling and ordinary high-temperature cooking below 121 ℃. Such as: snack packaging, sauce bag, dried tofu packaging, chicken packaging, beef packaging, poultry packaging, chestnut packaging, rice packaging, pet food packaging, high temperature cooking packaging,etc..

Features Benefits
✦ Exceptional mechanical strength and puncture/impact resistance ✦ Capable of heavy packaging, sharp or rigid products with excellent packaging safety
✦Good dimensional stability ✦ Excellent performance in printing and various coating processes
✦ Isotropic physical properties ✦ Minimum distortion after retort

Product Parameters

Thickness /μm Width/mm Treatment Retortability Printability
15 300-2100 single/both side corona ≤121℃ ≤9 colors

Notice: retortability and printability are depending on customers’ lamination and printing processing condition.

Performance Comparison of General External Materials

Performance BOPP BOPET BOPA
Puncture Resistance
Flex-crack Resistance ×
Impact Resistance
Gases Barrier ×
Humidity Barrier ×
High Temperature Resistance
Low Temperature Resistance ×

bad×      normal△      quite good○      excellent◎

Applications

HOA1 can be used for color printing within 9 colors (including 9 colors), bag making with sealing width ≤ 6cm, and high-grade packaging with frame requirements. It is not easy to warp and curl after boiling and ordinary high-temperature cooking below 121 ℃. Such as: snack packaging, sauce bag, etc.

Applications (1)
Applications (2)
Applications (3)

FAQ

Use Precautions

✔ Protective film does not absorb moisture

✔ Samples should be wrapped in aluminum-plastic composite bags.

✔  Please do not open the package early before use.

✔ Open it when it is about to be used.

✔ If it can't be used up, the remaining film should be wrapped with good barrier aluminum plastic film immediately.

✔ During printing, the first color group is not printed on the plate roll, and pre- drying is required.

✔  Please put it into the curing room to dry for 2-3 hours before use.

✔ It is suggested that the temperature and humidity in the production workshop should be controlled at 23 ±5 ℃, and the humidity should be less than 85% RH.

✔  Avoiding collision during handling and transportation


  • Previous:
  • Next:

  • Write your message here and send it to us