OEM/ODM China Aluminum Laminated Film For Pouch Cell Case - EHAr – BOPA Film with High Barrier Performance – Changsu
OEM/ODM China Aluminum Laminated Film For Pouch Cell Case - EHAr – BOPA Film with High Barrier Performance – Changsu Detail:
EHA has good tensile strength and rubbing resistance contrast to PVDC film, such as KNY, alumina/ silicon oxide with vaccumn metalized. It can maintain the same superior oxygen barrier effect after repeated rubbing. EHA has high transparency and its film color would not have obvious change with time. The color of EHA will not change significantly with time. During incineration, it will not produce dioxins or toxic gases containing chlorine.
| Features | Benefits |
| ✦High gas/aroma barrier | ✦Extend shelf life, better freshness |
| ✦High mechanical strength and puncture/impact resistance | ✦Capable of packing heavier/larger products, rigid or sharp bone-in products |
| ✦Good dimensional stability ✦No barrier loss upon film deformation ✦Thin but multi-functional |
✦Accurate reverse printing ✦Stable barrier ✦Cost effective |
| Type | Thickness/μm | Width/mm | Treatment | OTR/cc·m-2·day-1
(23℃, 50%RH) |
Retortability | Printability |
| EHAr | 15 | 300-2100 | single/both side corona | < 8 | 100℃ pasteurization | ≤ 12 colors |
Notice: Retortability and printability are depending on customers’ lamination and printing processing condition.
| Performance | BOPP | KNY | EHA |
| OTR(cc/㎡.day.atm) | 1900 | 8-10 | ＜ 2 |
| Surface Color | Transparency | With light yellow | Transparency |
| Puncture Resistance | ○ | ◎ | ◎ |
| Lamination Strength | ◎ | △ | ◎ |
| Printability | ◎ | △ | ◎ |
| Environment-friendly | ◎ | × | ◎ |
| Soft Touching | △ | ◎ | ◎ |
Bad × it’s OK △ quite good ○ excellent ◎
EHAr is a transparent, high-barrier functional film. It’s heat-resistant to 100℃ boiling, OTR lower than 8 CC/m2.d.atm. Comparing with the conventional BOPA films, the oxygen resistance performance of EHAr is ten times better, which makes it very suitable for the packaging that has strict requirement in gas barrier, such as meat products, pickles and compound condiments.
Deviation of Upper and Lower Printing Position
Causes:
● The selection of nylon film is wrong and the product type does not match the printing requirements.
● One side can be aligned, and the color group behind the other side gradually shifts inward
● High temperature and humidity in printing environment lead to rapid moisture absorption and expansion of nylon.
●Too slow printing speed leads to moisture absorption of BOPA
Suggestions:
✔ It is recommended to use the temperature (23°C ±5°C) and humidity (≤75%RH). If the relative humidity exceeds 80%, stop using.
✔ Properly increase the tension, improve the printing speed of more than 60m/min for manual overprinting;
✔ Ensure printing speed up to 160m/min.
Product detail pictures:
Related Product Guide:
Just about every member from our large efficiency income crew values customers' wants and enterprise communication for OEM/ODM China Aluminum Laminated Film For Pouch Cell Case - EHAr – BOPA Film with High Barrier Performance – Changsu , The product will supply to all over the world, such as: Sao Paulo , Pretoria , Grenada , With the development and enlargement of mass clients abroad, now we've set up cooperative relationships with many major brands. We've our own factory and also have many reliable and well-cooperated factories in the field. Adhering to the "quality first, customer first, We are provideing high-quality, low-cost items and first-class service to customers. We sincerely hope to establish business relationship with customers from all over the world on the basis of quality, mutually benefit. We welcome OEM projects and designs.
By Louis
from Peru
- 2018.04.25 16:46
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Cherry
from Angola
- 2017.02.28 14:19
