OEM Customized Bopa Matte Film Packaging - Sequential BOPA With Balanced Physical Properties – Changshu
OEM Customized Bopa Matte Film Packaging - Sequential BOPA With Balanced Physical Properties – Changshu Detail:
HOA1 can be used for color printing within 9 colors (including 9 colors), bag making with sealing width ≤ 6cm, and high-grade packaging with frame requirements. It is not easy to warp and curl after boiling and ordinary high-temperature cooking below 121 ℃. Such as: snack packaging, sauce bag, dried tofu packaging, chicken packaging, beef packaging, poultry packaging, chestnut packaging, rice packaging, pet food packaging, high temperature cooking packaging，etc..
| Features | Benefits |
| ✦ Exceptional mechanical strength and puncture/impact resistance | ✦ Capable of heavy packaging, sharp or rigid products with excellent packaging safety |
| ✦Good dimensional stability | ✦ Excellent performance in printing and various coating processes |
| ✦ Isotropic physical properties | ✦ Minimum distortion after retort |
| Thickness /μm | Width/mm | Treatment | Retortability | Printability |
| 15 | 300-2100 | single/both side corona | ≤121℃ | ≤9 colors |
Notice: retortability and printability are depending on customers’ lamination and printing processing condition.
| Performance | BOPP | BOPET | BOPA |
| Puncture Resistance | ○ | △ | ◎ |
| Flex-crack Resistance | △ | × | ◎ |
| Impact Resistance | ○ | △ | ◎ |
| Gases Barrier | × | △ | ○ |
| Humidity Barrier | ◎ | △ | × |
| High Temperature Resistance | △ | ◎ | ○ |
| Low Temperature Resistance | △ | × | ◎ |
bad× normal△ quite good○ excellent◎
HOA1 can be used for color printing within 9 colors (including 9 colors), bag making with sealing width ≤ 6cm, and high-grade packaging with frame requirements. It is not easy to warp and curl after boiling and ordinary high-temperature cooking below 121 ℃. Such as: snack packaging, sauce bag, etc.
Use Precautions
✔ Protective film does not absorb moisture
✔ Samples should be wrapped in aluminum-plastic composite bags.
✔ Please do not open the package early before use.
✔ Open it when it is about to be used.
✔ If it can’t be used up, the remaining film should be wrapped with good barrier aluminum plastic film immediately.
✔ During printing, the first color group is not printed on the plate roll, and pre- drying is required.
✔ Please put it into the curing room to dry for 2-3 hours before use.
✔ It is suggested that the temperature and humidity in the production workshop should be controlled at 23 ±5 ℃, and the humidity should be less than 85% RH.
✔ Avoiding collision during handling and transportation
Product detail pictures:
Related Product Guide:
Our personnel are always inside the spirit of "continuous improvement and excellence", and together with the outstanding excellent goods, favorable price and good after-sales services, we try to gain every customer's trust for OEM Customized Bopa Matte Film Packaging - Sequential BOPA With Balanced Physical Properties – Changshu , The product will supply to all over the world, such as: Florence , Qatar , Croatia , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Ricardo
from Barbados
- 2018.06.19 10:42
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Martha
from Leicester
- 2017.05.31 13:26
