China Best quality Film Roll - EHAr – BOPA Film with High Barrier Performance – Changsu manufacturers and suppliers

Best quality Film Roll - EHAr – BOPA Film with High Barrier Performance – Changsu

Product Details

Feedback (2)

It can be a great way to enhance our solutions and service. Our mission would be to build inventive products to consumers with a superior working experience for balloon lighting film , bopp thermal lamination film , plastic film roll , sincerity and strength ,always keep approved good quanlity ,welcome to our factoty for visit and instruction and business.

Best quality Film Roll - EHAr – BOPA Film with High Barrier Performance – Changsu Detail:

EHA has good tensile strength and rubbing resistance contrast to PVDC film, such as KNY, alumina/ silicon oxide with vaccumn metalized. It can maintain the same superior oxygen barrier effect after repeated rubbing. EHA has high transparency and its film color would not have obvious change with time. The color of EHA will not change significantly with time. During incineration, it will not produce dioxins or toxic gases containing chlorine.

Features	Benefits
✦High gas/aroma barrier	✦Extend shelf life, better freshness
✦High mechanical strength and puncture/impact resistance	✦Capable of packing heavier/larger products, rigid or sharp bone-in products
✦Good dimensional stability ✦No barrier loss upon film deformation ✦Thin but multi-functional	✦Accurate reverse printing ✦Stable barrier ✦Cost effective

Type

Thickness/μm

Width/mm

Treatment

OTR/cc·m^-2·day^-1

(23℃, 50%RH)

Retortability

Printability

EHAr

300-2100

single/both side corona

< 8

100℃ pasteurization

≤ 12 colors

Notice: Retortability and printability are depending on customers’ lamination and printing processing condition.

Performance	BOPP	KNY	EHA
OTR(cc/㎡.day.atm)	1900	8-10	＜ 2
Surface Color	Transparency	With light yellow	Transparency
Puncture Resistance	○	◎	◎
Lamination Strength	◎	△	◎
Printability	◎	△	◎
Environment-friendly	◎	×	◎
Soft Touching	△	◎	◎

Bad × it’s OK △ quite good ○ excellent ◎

EHAr is a transparent, high-barrier functional film. It’s heat-resistant to 100℃ boiling, OTR lower than 8 CC/m2.d.atm. Comparing with the conventional BOPA films, the oxygen resistance performance of EHAr is ten times better, which makes it very suitable for the packaging that has strict requirement in gas barrier, such as meat products, pickles and compound condiments.

Applications (1)
Applications (2)
Applications (3)

Deviation of Upper and Lower Printing Position

Causes:

● The selection of nylon film is wrong and the product type does not match the printing requirements.

● One side can be aligned, and the color group behind the other side gradually shifts inward

● High temperature and humidity in printing environment lead to rapid moisture absorption and expansion of nylon.

●Too slow printing speed leads to moisture absorption of BOPA

Suggestions:

✔ It is recommended to use the temperature (23°C ±5°C) and humidity (≤75%RH). If the relative humidity exceeds 80%, stop using.

✔ Properly increase the tension, improve the printing speed of more than 60m/min for manual overprinting;

✔ Ensure printing speed up to 160m/min.

Product detail pictures:

Related Product Guide:

owing to excellent assistance, a variety of high quality products and solutions, aggressive costs and efficient delivery, we take pleasure in an excellent popularity amongst our customers. We are an energetic business with wide market for Best quality Film Roll - EHAr – BOPA Film with High Barrier Performance – Changsu , The product will supply to all over the world, such as: azerbaijan , United Arab emirates , Pretoria , Our company has already had a lot of top factories and qualified technology teams in China, offering the best goods, techniques and services to worldwide customers. Honesty is our principle, skilled operation is our work, service is our goal, and customers' satisfaction is our future!

cold laminating film